1. Fabric Protector
Prevents stains and waterproofs
Do not use on leather, suede or vinyl.
This product is more effective on clean fabrics. All surfaces to be protected should be thoroughly cleaned before application. Always test on a hidden area of the fabric to check for colorfastness. If colour is affected, do not use. Hold the spray 10-12 inches from the surface of the fabric. Spray evenly over the entire portion to be protected. Allow the fabric to dry for 4 hours.
2. Stain Remover For Fabric
Do not apply to natural wool fabric.
Before using this product, test the colour fastness on a hem or a hidden part of the material to be cleaned. 1. Pat stain with a dry cloth to remove excess moisture. 2. Moisten stain with Stain Remover and allow to soak in for 2 minutes. 3. a) Fabric: Using a
damp cloth, blot stain to absorb cleaner and let dry. If a ring appears, rinse affected area again by tapping gently with a clean wet cloth. Important: DO NOT RUB to avoid spreading stain. b) Vinyl - Synthetic and Bonded Leather - Bycast: with a damp cloth, gently rub stain and let dry. 4. Repeat these steps if necessary.
3. Enzymatic Stain Remover for Fabric
Do not apply to natural wool fabric or leather.
Before using this product, test the colour fastness of the material on a hem or a hidden part of the fabric. 1. Remove any solid residue, blot the stained area with a dry cloth. 2. Spray this product
directly on stain, let stand for 15 minutes. 3. With a cloth saturated
with lukewarm water and wrung out, clean the stain in a circular motion, from the outside to the inside. With a dry cloth, soak up the excess liquid and allow to dry. Repeat if necessary. For best results, clean stain within 24 hours.